Fabbaloo on LinkedIn: QIDI Tech’s Q1 Pro: A Consumer 3D Printer with Active Chamber Heating «… (2025)

FAQs

Can I use Cura with QIDI printer? ›

Start Cura - the 'Add a Printer' Wizard should start. Make sure you select "Add a non-networked printer" and then scroll down the list and select Qidi and X-Plus. You can give your printer a unique name here if you use multiple printers. Click the Add button.

QIDI Q1 Pro 3D Printer, 600mm/s High-Speed Fully Auto Leveling 3D Printers with Camera, 60℃ Chamber Heat, Support 350°C Printing, Tangle Detection, Printing Size 245 * 245 * 240mm.

So the team reached out to QIDI Tech—a 3D printer company based in Zhejiang, China—and was sponsored with their most recent product: the QIDI Tech X-Max 3.

You should check the wiring for any points of strain or damage, especially in the sections where the wires bend during 3D printer movements. You should also inspect the connectors at both ends of the wires of the bed and check for signs of damage, as that could also hinder the flow of electricity.

With the SimplyPrint plugin for Cura, you can send your sliced 3D print files directly from Cura to your SimplyPrint account. No more SD cards or USB sticks - just click print and watch your 3D printer go to work.

Cura is compatible with all UltiMaker 3D printer models and offers a wide range of preset third-party printers to select from. If you want to learn how to add a preset printer to Cura, visit this page for instructions. If your printer model is not in the list, you can also add a custom printer.

PLA is still a strong plastic and can be very durable if printed correctly. Pro PLA is suited as more of an engineering type filament where you need high impact resistance or heat resistance. Parts requiring to fit together like a nut and a screw or joints on a mask that must align afterward when assembling.

Temperature: Aim for a printing temperature between 190°C and 230°C. Use a temperature tower to find the specific sweet spot for your filament roll. While a heated bed isn't mandatory with PLA, it's recommended for consistent performance. Set it between 50°C and 60°C, especially for larger prints, to prevent warping.

Who is the founder of Qidi? Jianhai Xu is the founder of Qidi.

How big is the QIDI q1? ›

It has a build volume of 245 x 245 x 245 mm, CoreXY kinematics, a super stable (and aesthetically pleasing) all metal frame, and a dual z-axis with 4 linear rails for stability. It features automatic leveling with dual sensors, enabling users to get printing with precision, as soon as they take it out of the box.

-If there is a break in continuity or the thermistor is no longer providing any resistance, your printer will likely show a “mintemp error”. -Heater cartridges are regulated by the thermistors and if there is too much resistance at the heater cartridge, this will slow down the heating process.

Wait 5-10 minutes while the extruder and bed reach the preheating temperature. You can look at the LCD to see the current temperature and target temperature. Once the current temperature equals the target temperature, you can move on to the next step.

Thermal runaway is a dangerous phenomenon that can occur in FDM 3D printers when the temperature of the heating elements, such as the hotend or heated bed, rises uncontrollably. This can lead to severe damage to the printer, and in extreme cases, can even cause fires.

3D printing is an educational and rewarding pastime anyone can enjoy. With the 3D printing program CURA and a Creality Ender 3/Ender 3 Pro, you will be able to make things beyond your wildest dreams.

Whether you're a beginner or a professional, there's a printer that will work well with Cura. The Ender 3, Creality CR-10, Anycubic Photon, and Ultimaker 3 are 3D printers that work well with Cura. With Cura, you can fine-tune your prints and achieve desired results.